Mon – Fri: 8:00 a.m. – 5:00 p.m. • Sat & Sun: Closed

2018 Land Pride STB1072

Call for Price

Land Pride



The STB10 Snow Trip Blades are designed to fit tractor loaders. The STB10 is available in 5' and 6' widths for tractors with loaders in the 25-40 HP range. The 10 Series Model has a 21" curved moldboard.

  • Reinforced 12 gauge moldboard design: Provides added strength and durability.
  • Choice of 60" or 72" working widths: Allows customers to choose the blade that meets their operational needs.
  • Double-acting angling cylinder (single & dual): Easily enables up to 30 degrees of angling to left or right distributing the load where you want it to go.
  • Trip design with springs: Protects the structural integrity of the blade while still maintaining load control no matter what the bottom edge encounters.
  • Easy-attaching mounting system: Adapted for tractor loaders with quick-attach front mounting plates.
  • Replaceable bottom wear edge: Offered in steel or heavy-duty poly construction to match ground & surface operating conditions.
  • Skid shoes: Offered as standard equipment. Establish lower limits of blade operation to prevent surface gouging or cutting too deep. Also provides protection to the moldboard as cutting edge wears.
  • Blade marker: Provides operator with improved awareness and visibility of outermost edges of the blade to prevent unwanted contact with ground obstacles.
  • Locking system: Allows for light blading.
  • Optional top-mounted rubber deflector: Helps prevent snow from over-topping the moldboard in deeper snow conditions.
  • Cushion valve: Helps protect the moldboard and cylinders in the event an obstruction is hit, by allowing hydraulic fluid to bypass the cushion valve and flow back to the tractor.
  • Tractor Horsepower: 25 to 40 HP
  • Moldboard Thickness: 12 Ga.
  • Blade Width (Maximum Cutting Width): 72"
  • Cutting Width @ 30° Angle: 62 3/8"
  • Moldboard Height (with blade): 22 1/4"
  • Maximum Blade Angle: 30o left & 30o right
  • Angle Cylinder Size: 2" bore x 6" stroke
  • Maximum Hydraulic Pressure: 3000 psi
  • Cutting Edge (Steel & Poly): 1/2" x 6" replaceable & reversible
  • Trip Release Pressure: 600 lbs
  • Base Unit Weight: with steel cutting edge = 390 lbs.; with poly cutting edge = 403 lbs.



Cutting Width
72 in.
Cutting Edge Height
6 in.
Moldboard Height
22 1/4 in.
Blade Angling
30 deg. left & 30 deg. right
With Steel Cutting Edge: 390 lb.; With Poly Cutting Edge: 403 lb.

Related Products