Mon – Fri: 8:00 a.m. – 5:00 p.m. • Sat: 8:00 a.m. - 12:00 p.m. • Sun: Closed

2018 Bush Hog 100-08

Call for Price

Bush Hog



The 100 Series Rear Blades are the ideal choice for heavy-duty grading chores around the farm such as road construction, terracing, dam building, and cleaning out feed lots.

These blades offer a choice of manual or hydraulic tilt, angle, and offset adjustments. Moldboard can be reversed for back filling. They are rated for use on a wide range of 2WD and 4WD tractors,

depending on blade width.

With their heavy-duty construction, the 100 Series Blades is engineered and built to meet the most demanding conditions.

Performance Features
  • 100 Series is available in 8 ft. & 9 ft. operating widths.
  • Manual or Hydraulic Tilt, Angle and Offset Adjustments
  • Reversible Cutting Edge
  • Standard Parking Stand
Construction Features
  • Heavy-Duty Mainframe
  • High-Strength Reinforced Moldboard
  • Tubular Construction
  • A Frame Construction
  • Powder Coat Paint
  • Heavy-Duty King Pins
  • Moldboard Width: 8 ft.
  • Moldboard Height and Thickness: 17 in. x 3/8 in.
  • Moldboard Cutting Edge: 1/2 in. x 6 in.
  • Hitch: 3-Pt. Cat. lI & III I Quick Hitch
  • Approximate Weight: 836 lb.
  • Max. Tractor Hp (Pto) 2-Wheel Drive: 125 HP
  • Max. Tractor Hp (Pto) Front Wheel Assist: 105 HP
  • King Pin Diameter: 3 in.
  • Tilt Adjustment: 15 deg. up or down (manual or hyd.)
  • Offset Adjustment: 30 in. left or right (manual or hyd.)
  • Angle Adjustment: 45 deg. left or right (in forward and reverse position, manual or hyd.)
  • Skid Shoes: Optional
  • End Plates: Optional
  • Parking Stand: Standard
  • Hydraulics: Optional
Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.



Cutting Width
8 ft.
Moldboard Height
17 in.
Blade Angling
45 deg. left or right (in forward and reverse position, manual or hyd.)
836 lb.


Related Products